Load data for .30 PICRA + .308 | 185gr | Lapua Scenar

Recommended Powder(s): Accurate TCM

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 185gr \| Lapua Scenar
Manufacturer SKU:	4PL7071 \| GB432
Bullet Weight:	185gr \| 12.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.315" \| 33.4mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.434" \| 11.0mm
Shank Seated Depth:	0.198" \| 5.0mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3168_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:9

Load data for 48 loads in caliber .30 PICRA with .308 | 185gr | Lapua Scenar bullet and 24 powders such as Accurate TCM. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35795	88%	**02	100%
Accurate 4100	<<locked>>	72%	35012	86%	**81	93%
[Accurate No. 11 FS]*	<<locked>>	82%	35433	87%	**98	87%
Accurate No. 9	<<locked>>	63%	36376	90%	**84	98%
Accurate TCM 👍	<<locked>>	63%	36260	89%	**75	99%
Alliant 2400	<<locked>>	69%	35273	87%	**88	96%
Alliant BLUE DOT	<<locked>>	71%	34635	85%	**45	99%
Hodgdon H110	<<locked>>	78%	36042	89%	**27	91%
Hodgdon LilGun	<<locked>>	78%	35317	87%	**50	97%
Hodgdon TrailBoss	<<locked>>	96%	25425	63%	**1	100%
Maxam CSB 1	<<locked>>	65%	36172	89%	**4	100%
Ramshot Enforcer	<<locked>>	69%	34853	86%	**84	96%
ReloadSwiss RS 14	<<locked>>	94%	23960	59%	**7	100%
ReloadSwiss RS 30	<<locked>>	95%	36158	89%	**50	94%
SNPE Vectan A0	<<locked>>	64%	36405	90%	**10	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	34621	85%	**84	98%
SNPE Vectan BA7 1/2	<<locked>>	67%	35824	88%	**60	100%
[Somchem S265]*	<<locked>>	84%	35128	87%	**65	89%
Vihtavuori 3N38	<<locked>>	69%	35708	88%	**32	100%
Vihtavuori N105	<<locked>>	71%	35534	87%	**45	100%
Vihtavuori N110	<<locked>>	87%	35346	87%	**11	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	34592	85%	**9	100%
Vihtavuori N350	<<locked>>	63%	36042	89%	**66	100%
[Winchester 296]*	<<locked>>	78%	36376	90%	**43	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26223	65%	**4	100%
[Accurate 4100]*	<<locked>>	61%	23859	59%	**14	87%
[Accurate No. 11 FS]*	<<locked>>	72%	26107	64%	**63	81%
Accurate No. 9	<<locked>>	61%	34200	84%	**52	97%
Accurate TCM	<<locked>>	61%	33881	83%	**45	98%
Alliant 2400	<<locked>>	61%	27064	67%	**63	92%
Alliant BLUE DOT	<<locked>>	61%	26397	65%	**27	97%
[Hodgdon H110]*	<<locked>>	61%	20871	51%	**4	80%
[Hodgdon LilGun]*	<<locked>>	61%	19508	48%	**4	86%
Hodgdon TrailBoss	<<locked>>	67%	15418	38%	**9	100%
Maxam CSB 1	<<locked>>	61%	33286	82%	**8	100%
Ramshot Enforcer	<<locked>>	61%	26948	66%	**73	93%
ReloadSwiss RS 14	<<locked>>	66%	14576	36%	**3	100%
[ReloadSwiss RS 30]*	<<locked>>	72%	19493	48%	**1	81%
SNPE Vectan A0	<<locked>>	61%	33518	83%	**1	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	13938	34%	**4	83%
SNPE Vectan BA7 1/2	<<locked>>	61%	31024	76%	**10	100%
[Somchem S265]*	<<locked>>	67%	21756	54%	**8	80%
Vihtavuori 3N38	<<locked>>	61%	28776	71%	**50	100%
Vihtavuori N105	<<locked>>	61%	25831	64%	**27	100%
[Vihtavuori N110]*	<<locked>>	61%	16462	41%	**9	83%
Vihtavuori N32C Tin Star	<<locked>>	61%	24729	61%	**8	100%
Vihtavuori N350	<<locked>>	61%	33330	82%	**40	100%
[Winchester 296]*	<<locked>>	67%	25266	62%	**79	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data